1. Turn on the phone and press the start button.
2. To stop normally, press the stop button, not the emergency stop button.
3. Do not press the emergency stop button under abnormal conditions, as the emergency stop will affect the quality of the fabric.
4. It is forbidden to touch the sword belt and the sword belt wheel while driving, and it is forbidden for any debris to obstruct the sword belt weft insertion and the sword belt wheel rotation on the sword belt.
5. Persons with too-long hair should tie their hair and wear a hat to prevent getting involved in the beat-up shaft.
6. When the yarn is broken, the stop button must be pressed before the yarn is connected, and the yarn is connected.
The current rapier looms use highly integrated electronic technology and use software to control the work of the loom. Therefore, after the general loom is debugged, it is relatively simple to use, because it itself can collect the operation of the loom through sensors. Information, and then give instructions to judge the situation. Therefore, after the loom has adjusted the cloth surface and turned on, there is no problem if the person does not touch the rotating parts of the machine.